2010 Electra Glide Ultra Classic

Q: Help!!! My honey gave me a mini vacation as a newly just retired gift. After 41 years of building submarines I called it quits. She loaded my bike up with all that we needed and as I started to back the bike out of the garage, which is on a incline, I held the front brake on as I slowly backed out. The bike was not running at this time. Next thing I knew there was lots of smoke coming from the brake light switch. This was the beginning of the “aw shit” moment. I jumped off the bike to investigate and found the bottom wire to the switch melting. I squeezed the brake handle and at first nothing happened and my brake lights stayed on but soon after the smoke started again. So I know there’s a problem but I don’t know where to begin looking. Thanks for any advice you can offer.
William P
2010 Electra Glide Ultra Classic

A: Hello William, Congrats on retirement.
Odd, did you test the rear brake light switch?
https://www.fixmyhog.com/video/how-to-test-a-rear-brake-switch-001635/

Hogger Feedback:
It turns out there was a recall on a whole lot of HG’s for that switch, and also for the tank mount. I found out the hard way. Check out this link and maybe pass it along on your website.
Regards, Bill

https://www.aboutlawsuits.com/harley-davidson-touring-recall-22131/
Related Videos:
Harley Brake Switch Diagnosis
How to Test a Harley Brake Light Switch
How to Fix a Motorcycle Brake Light Switch
How to Replace Brake Light Switch on a Harley
Electrical Systems

We even have an article on it In The Shop – Read It Here

Share tips, start a discussion or ask one of our experts or other students a question.

Make a comment:
500 characters remaining

8 Responses to “2010 Electra Glide Ultra Classic”

  1. DAVID VIGLIONE

    Is there a link to replace my old fork sliders with Chrome one?

  2. Donald Kinser

    There is a recall on the rear brake switch starting on 09 touring model to about 2011-12. Sound like your talking about your front brake switch though. It sure sounds like it shorted out good.

  3. Don

    Usually when wires smoke like you are describing, you have a dead short. Check the switch to see if there is a broken wire or bad switch!

  4. Lionel DeGrood

    What are the simplest ways to trouble shoot a non working cruise control on my 01 Ultra.

  5. Bob batey

    I have 98 flhtcui studs on amp gage were not rust proof,stopped working ,had to replace.Not right. Any comment?

  6. Fred R Curtis

    I need to know how to fix my fairing one of the small brackets broke going to the speaker to main braket

  7. TRENT

    07 road king no brake light horn or turning signals check fuse on acc its good any idea's?

  8. TheMaddYooper

    You got lucky to find it the way you did. I hope you got it fixed and still made the ride.