Air Shocks

By Dennis Santopietro

Q:Hi, I have a 2004 Electra Glide with stock rear air shocks. I tried to put some air in them, but something would not allow the air to go in. I was using the Harley pump. The gauge read 22 lbs. and I normally run 27 lbs. I weight almost 300 lbs and I like a stiff ride. Any suggestions why they will not accept air.
P.S. – I read in the owners manual and it says to always perform this while bike is on the jiffy stand. The last time I put air in them, I think I had it on the jack with wheels off the ground. Could I have damaged something then and if so, what damage possible occurred ? What are some things to check ?

A: Mark, chase the air lines from the air fill valve to the shock bodies. Make sure the lines are not kinked, crushed, or damaged in any way. Also, try using a friends shock pump. See if you have the same results. If the air lines are o.k., and another shock pump reads the same; your are simply dealing with 10 year old shocks. These are sealed and not a serviceable component.

Related Video: Touring Shocks

Arnott Suspension Review

Watch the installation Videos on Fix My Hog: Harley Air Suspension Install with Arnott

Review: Arnott Air Suspension Ultimate Ride Series

Motorcycle Shocks vs. Car Shocks: What’s the Difference?

Share tips, start a discussion or ask one of our experts or other students a question.

Make a comment:
500 characters remaining

3 Responses to “Air Shocks”

  1. TRAVIS

    What is the difference in air shocks number 54565 97A or 54565 97C

  2. Frank Mason

    <strong> Ticket 19772 have a 2000 ROAD KING my air shocks won't hold air but they hold air if I leave the air pump on any suggestions?

  3. Rickey Smith

    How do I need to check rear stock shocks on a 2001 electra glide to see if they are bad. have broken 2 swing arms and now have upgraded to a 2002 swing arm but ride is way to stiff. Any suggestions on what I need to check or adjust???