Caliper Bolt Stripped

Question I grabbed a 3/16 Allen instead of the 5mm and the caliper bolt stripped the head on the slide bolt, its recessed in the caliper. Do you have any suggestions on how to get a stripped bolt out of the caliper?


Via Email


Answer Try and use a Torx bit one size larger and a hand impact (the one I use for lower fork drain bolts)


Related Videos:
How To Remove Stripped Bolts
Stripped Bolt Removal
4 Piston Front Caliper


Have more questions? Check out the Tags here and our Q&A index page to find some answers here.

Share tips, start a discussion or ask one of our experts or other students a question.

Make a comment:
500 characters remaining

4 Responses to “Caliper Bolt Stripped”

  1. Gerald

    2011 Heritage. I would like to mount a tubeless rear rim. Which, if any stock Harley rims would fit? Thanks

  2. Kevin Howard

    Another suggestion: buy a cheap hex bit socket of the biggest size you can get in there, & JB weld it into the head of the bolt. Let it set up & remove the bolt with a ratchet.

  3. Don

    Try putting the right size allen in the bolt and tap a small flat screwdriver into one of the flats. It may jam the allen enough to get a turn started and loosen the bolt.

  4. Denis Belokostolsky

    Easy-outs are the best cure for a problem like this.