I bought an aftermarket front fender for my bike that wraps and hugs my 21in front wheel. I am having trouble mounting it the correct way, first time we mounted it I went over a RR track on the highway at 70 mphs and the fender sucked down on to my front tire and locked it up and caused me to wreck. If you could please help me figure out the correct way to mount it on this springer front end it would more than greatly appreciated.
Via Email
When you are mocking up a custom fender, it is important to secure a couple lengths of 1/2″ diameter oil hose/line to your front tire. Secure the hose across/around the tire. Then take the fender and let it rest on the wheel/oil lines. At this point you can mark the points where you will drill holes for mounting the fender securely. Determining proper tire clearance inside your fender is extremely important. As you know, an incorrect clearance can be very dangerous.
Related Fix My Hog Videos:
Paint Your Harley Video Project
Have more questions? Check out our Q&A index page to find some answers.
Ouch! Railroad tracks on a highway? At 70mph?
What state has RR tracks on the highway?
Texas has at 75
This has nothing to do with a frt fender,but wanted to ask.im putting 10″ bars on my 15 streetglide.will I need new lines or cables? Put them on my 07,06,and 03 and only had to change frt brke line going down to frt calipers.
Hello Bill,
Thank you for contacting us. Great question! The ‘Ask an Expert’ section is currently for members of our online community. By becoming a member, you will have access to our expert’s knowledge. With your membership you will also receive discounts on products and hours of Premium video content.
If you are interested in becoming a member to Fix My Hog, please click on the special offer below:
https://go.fixmyhog.com/C20828
If you have any further questions on becoming a member, please chat, email, or contact Customer Service at 1-855-231-0653.
Thanks!
Madeline
Fix My Hog Video Membership
I am a member