I need to know about fuel valve replacement on a 2003 Road King.
Via Email
First drain your tank. When you feel that the tank is sufficiently drained. You can jack the rear of the bike so residual fuel will move forward in the tank; away from the valve. Next, cut, or unscrew the fuel line clamp at the valve. Turn the valve nut counter clockwise until the valve can be removed.
Related Videos:
Harley Fuel Valve Replacement
Drain Tank
Have more questions? Check out the Tags here and our Q&A index page to find some answers here.
Share tips, start a discussion or ask one of our experts or other students a question.
Make a comment:
Already a member? Sign in
6 Responses to “Fuel Valve on 2003 Road King”
I have a 2002 road king screaming eagle fuel injected. I have had a skip for the last 30,000 miles and no mechanics seem to be able to find the problem, and that includes two different Harley dealerships. I've invested thousands in repair with no satisfaction. Anyone help?
I've just cleaned out a front brake master cylinder on a 1998 sporster ( 9/16) I have recently purchased. There are two holes that the piston passes when the brake is applied,I recall one of these being solid therefore only allowing fluid/air bubbles to travel through one,is this as it should be or is the solid one blocked. The problem is the brakes are binding and pressurising resulting in the brake lever becoming solid.
How do I fix a gear selector indicator sensor problem I've been told the sensor is supposed to be in or near the transmission but I can't find it in the manual. I have a 2013 standard
I have oil coming out of carb on 03 fat bow
Cruse control does not work on my 2007 ultra after I changed the throttle grip ??
I have a 2000 Springer FLSTS; I need to how to take out and re-install the fuel gauge on the gas tank. Also, why does it leak when its on the side stand when the gas tank is full? It leaks out of the little hose that is under the front of the left tank.