I have bought your videos before and I have to take my front tire off to have the fender painted and I have Harley abs brakes. Do you have a video that shows taking off the front wheel of a touring bike with Harley abs brakes? I will pay for that.Gary S
Hi Gary, Thank you for your continued support and question. Yes, we do have a video on that.Check it out: Front Tire R&R
I have a 2015 Breakout with ABS and wish to change the rear wheel. How do I disconnect the ABS sensor please?
You will not have to disconnect the ABS sensor.
After pulling the axle, let it simply hang out of your way.
Just note orientation of the wire and pick up before loosening and removing the axle.
https://www.fixmyhog.com/post/videos-harley/
https://www.fixmyhog.com/video/tire-maintenance-002168/
how does the brakes come off on a Harley 2000 springer the back off do you have to take the wheel off?
Hi John. You need to remove the rear axle and wheel spacers to remove the rear caliper. However, you do not need to remove the rear caliper in order to replace your rear brake pads. Simply remove the 2 pins and compress the caliper pistons.
https://www.fixmyhog.com/video/4-piston-front-caliper-005173/
https://www.fixmyhog.com/video/2000-2003-front-rear-brake-caliper-service-001236/
Thanks
Mark-FMH
I want to remove my ABS completely on my 2016 Fatboy. Is there a video for that?
Mark,
We do not have a video that covers this. It is not something that we recommend.
Mechanically, you would need to make spacers (1 for the front & 1 for rear) to replace the ABS sensors. You would need front & rear brake lines for when you eliminate the ABS modulator.
Your BCM will continually flash the ABS icon in your speedo head signifying an error.
https://www.fixmyhog.com/video/flushing-rear-brake-fluid-levels-015448/
-Mark
Fix My Hog