Harley Rocker Cover Issue

Question I have a question for you. I own a 2012 FLHRC with the 103cc. The bike now has 13,000 miles. I started to notice oil on the front cylinder Harley rocker cover, the front bolt. I put a wrench to it but it was tight. I checked the torque at 18 lb-ft. Thinking it moved a little, I rode the back and again found oil. I then put a wrench to the left front bolt and found it loose. I backed off the right bolt a hair and re-torque both bolts to 15 lb-ft. The book calls for 15 to 18 lb-ft and I like to start at the bottom. Tell me if what I did is acceptable ?
PS. I am a member and enjoy checking in now and then. The videos are great. Thanks for the help. Jim G


AnswerJim, evenly, re-tightening your Harley rocker cover is completely acceptable. However, this may only be a temporary fix if a gasket surface has been compensated by the constant vibration of the loosened rocker box. If this leak reappears, be sure to replace this rocker box gasket with a new H.D. gasket. Also, use a little Loctite on your rocker box hardware when you are on your way back together. Of course, torque evenly to factory specs. Thanks for your question and for your business.



Related Videos:
Roland Sands Rocker Upgrade Install

Have more questions? Check out the Tags here and our Q&A index page to find some answers here.

Share tips, start a discussion or ask one of our experts or other students a question.

Make a comment:
500 characters remaining

4 Responses to “Harley Rocker Cover Issue”

  1. ggoo007

    <strong> Ticket 17427 Do you have a video with a three piece rocker box cover gasket change? email me for response

  2. ggoo007

    Do you have a video on changing rocker box gasket on a 1985 fxwg

  3. Jon

    I have a 2003 Heritage with 56K on the speedo and just noticed a very slight oil seepage coming from both rockers...nothing serious just a slight leakage ? Should I just try tourqueing it or replace the caskets ? Thanks

  4. Mike

    "Red Loctite"??? Since those same bolts may need removal at some point, I think the suggestion should be "Blue Loctite"--it's removable, but red is not without heat.