HELP. Slight right floorboard vibration at all RPM Nothing touching. 2015 Ultra Limited. Started after I changed only muffler. Went back to stock muffler. Still fell vibration, could it be stage 1 tune?
Via Email
It would be hard to speculate what might cause a “slight” floorboard vibration. These motorcycle’s can vibrate themselves apart overtime. Your front pipe may be tapping/hitting your right side floorboard bracket when you are riding. May not be touching when parked or idling on kick stand. Otherwise, you can try loosening every mounting point of your exhaust. Then re-tighten, evenly, starting at the heads and working your way back to muffler mounts. See if there is any change. Also, check motor mounts. Don’t forget the top mount.
Related Fix My Hog Videos:
Exhaust Upgrade Videos
Have more questions? Check out our Q&A index page to find some answers.
Share tips, start a discussion or ask one of our experts or other students a question.
Already a member? Sign in
5 Responses to “Right Floorboard Vibration”
I do have a similar problem with my Fatbob 2015, but it vibrate footpeg and handlebar betwen 1800 and 2200 rpm...I replaced the exhaust for an hipower 2x1 and the front mount for a predator, but still there...it is like a resonance?
I have the same issue after installing headers, and programmer . Thanx for the advice.
Also he might check and make sure the strap holding his heat shield is not broken. Sometimes you can't tell unless you take the heat shield off and have a close look. Hope this helps and you find the problem.
I had the same problem 95 Flhtc ..Had to replace motor mount..problem solved..
Reason why my front tire wearing right half more than left 06 RK