Starting Problems 2006 FLSTCI

Question I have a starting problems 2006 FLSTCI and just put a 95 big bore kit in with SE 211 cams and now the bike will not start. Trouble shooting we found it has no spark. It had a power commander 3 USB in it and I removed that and still nothing. Any suggestions?


Via Email


Answer Hi Marc,

The Power Commander only modifies the signal sent from the ECM. Chances are the ECM has burnt out, from what it is impossible to say. When a scanalizer is plugged in, does it show any codes?



Related Videos:
Error Codes

Have more questions? Check out the Tags here and our Q&A index page to find some answers here.

Share tips, start a discussion or ask one of our experts or other students a question.

Make a comment:
500 characters remaining

2 Responses to “Starting Problems 2006 FLSTCI”

  1. Lorna

    Starting problem with our 94 softtail. Recent ly replaced starter. Sometimes turns rightonver. Others just click clickclick. Best advice?

  2. Tom Allen

    My 2006 FXD35 ran fine when put away last November. I have no spark and the fuel pump does not run when I turn the key on and hit the run switch. The engine light icon comes on and goes off as if the fuel pump was working. I have checked all the simple stuff like .fuse, battery and connections. The Power Commander green lights go up and down the scale and show 0 for fuel. I think it could be the ECM. What do you think? I did pull the fuel pump to test it and it turns fine. Since I had it out I changed the filter after 10 years why not.