Stator Has 2 Separate Wires

Question 2005 FLHTCU Ultra Classic
I have watched you stator r&r but not my year exactly. My replacement stator has 2 separate wires, neither of which is numbered or marked as to their placement into the regulator. So does it matter which way these 2 wires are inserted back into the harness?

Thank you in advance…Gary

Via Email

Answer That’s a good question.
Stater wire location does not matter.
You can insert the wires into either side of the plug on your year/model.




Related Fix My Hog Videos:
https://www.fixmyhog.com/video/harley-stator-rotor-shell-replacement-005385/

Have more questions? Check out our Q&A index page to find some answers.

Share tips, start a discussion or ask one of our experts or other students a question.

Make a comment:
500 characters remaining

7 Responses to “Stator Has 2 Separate Wires”

  1. John McKay

    When I replace the stator on my 2001 dyna should I replace the regulator too?

  2. Mike

    Changing 3 phase stator on 2006 FXDCI how do I get the wires out of the plug so I can get them through the case and does it matter the order they go back in they're all black?

  3. Ian Rennie

    98' 1340 how can I run led flasher lights on original flasher unit?

  4. Sharon Cruise

    Stator replaced by Dealership Aug 2017. Bike wasn't charging. Replaced battery 2 yrs old. Still having same problem charging light-oil light come on I told them I thought It possibly was the regulator. they stated it was the stator/battery. OK still having lights coming on and not charging.

  5. Dennis

    How often should my battery need to be charged? I have to charge it about every month.

  6. John

    09 flstc 96" efi for several weeks when I start the motor after about 3 seconds it shuts back down so I turn it of then on and restart and is ok then runs like always any idea of what this might be?

  7. Anthony

    I have a 2011 Street Glide. I am getting a check engine light along with a battery light. I charged the battery, cleared the code and I am able to ride for a while before I get the code again. The volts seem to intermit, at first the gauge reads approx. 14.5 - 15.5 then drops to 12.0 and remains at 12 until I get the code again.