Turn Signals Not Working

Question for Fix My Hog 2000 Superglide Harley. Having a problem with my turn signals replace them all first the wiring for back ones was bad and shorting together so replaced it all now all running lights will come on. If I make the emergency lights on they all will flash, but can not get them to work for left or right turn? Is there a relay or something out? Please help need inspection soon.

Via Email

Fix My Hog Answers You have the left & right signal wires tied together. Go back and disconnect one side in the rear. See what changes.

Related Fix My Hog Videos:


https://www.fixmyhog.com/video/circuits-002183/ https://www.fixmyhog.com/video/welcome-to-fix-my-hog-electrical-002169/


https://www.fixmyhog.com/video/harley-wiring-connectors-004726/
https://www.fixmyhog.com/video/molex-connector-on-harley-005022/

Have more questions? Check out our Q&A index page to find some answers.

Share tips, start a discussion or ask one of our experts or other students a question.

Make a comment:
500 characters remaining

5 Responses to “Turn Signals Not Working”

  1. Irving Mckinney

    I had a similar issue on my 2014 HD Sportster Iron 883. I discovered that my issues related to my turn signal failure was due to the rear wiring for signal lights were exposed and rubbing against rear tire and wore down to the copper line. Once u cut damaged wiring and taped it up and attached wiring securely behind rear plate so it did not make contact with tire. I had no more issues and fixed my signal light problem.

  2. Joseph

    on my 1998 fotboy Harley Davidson,All 4 of my turn signals start flashing only when I turn the left turn signal on?

  3. mrjoeyd2017

    Why does all my blinkers start flashing like the 4 ways in a car on my 98 Fatboy only when I turn the left turn signal on.Please help me out.

  4. Rayetta

    How do I get to the bulb in the your pack to change it on a 2011 tri-glide

  5. John covault

    <strong> NB Ticket 16652 I have a 2003 Dyna superglide, the left turn signals front and back quit working, is there a fuse for this I cannot find, a relay out maybe?</strong>