I took off rear wheel to replace the tire. When replacing it, I got stumped and I have 2 wheel spacers for right side. I have service manual but only shows part explosion for chain drive. Mine is belt drive. Spacer on left side is longer and both spacers for right are both 3/4 wide. One goes against bearing seal and not sure where second one goes. Any suggestions?
Via Email
You are supposed to have one 3/4″ spacer on each side, against the wheel bearing. If everything is stock; one spacer on the right (along with the caliper bracket), and two spacers on the left. One 3/4″, one, longer.
Related Videos:
Rear Tire Search List
Have more questions? Check out the Tags here and our Q&A index page to find some answers here.
Will a seat from 2009 later fit a 2008 Roadglide , Thanks
Yes.
It will fit.
http://www.fixmyhog.com/video/cooling-hot-harleys-love-jugs-005958/
I have a 06 ultra classic with amp system ,I have installed a aftermarket receiver ,my harness goes through the amp .I can not get my speakers to play ,plays fine with stock radio need help
We would suggest reviewing the instructions and inspecting your connections. If you are confident that the amp is installed correctly, try calling customer service for the amplifier.
http://www.fixmyhog.com/video/circuits-002183/
http://www.fixmyhog.com/video/circuits-002183/
http://www.fixmyhog.com/video/harley-wiring-connectors-004726/