Leslie Kendal, curator at Petersen Auto Museum, takes us on a private tour of his exhibition “Fins, Form Without Function”. He describes the evolution of fins and shows us some very rare cars.
Bob and Mark demonstrate the process for lubricating your Harley’s steering head bearings and adjusting the fall-away. As always, Bob stresses the importance of adequately prepping all bolts, consulting your user manual to be sure everything is done correctly, covering any painted areas on the bike and, if possible, working with two sets of hands.Watch Now >>
Bob and Mark demonstrate the professional technique for finding the tight spot in a Sportster’s rear wheel belt. You should do this without a rider or passenger and with the bike in neutral. They teach you how to check for belt tension and deflection and how to retorque the axle so you can give your bike a smoother ride.Watch Now >>
Now that you’ve fully serviced your Harley Sportster, you can take the opportunity to check all of the safety features on the bike. Make sure the lights are working properly, the horn makes noise, turn signals are operational, and all grommets are in place. Then you should check the throttle, add oil and fill the tires to the correct level. Once your finished with the service, get out and ride!
*****The service manual states you should follow your negation cable down from battery and remove nut that secures the connector to ground stud on the crankcase boss behind the starter motor assembly. You will need to do the reverse during installation.Watch Now >>
Sportster Maintenance can also bring comfort. Here’s any easy way to get more hours in the saddle. Our experts also walk through proper belt services and adjustment on Harley rear shocks. If you are experiencing a wobble make sure to check out these top 6 procedures. Next Video: Belt DeflectionWatch Now >>