Bikes & Babes accelerates you into the real-life world of custom motorcycle building. It’s all smoke, fire, and steel without the DRAMA. iKuztom’s 13 episodes get you up close and personal with an elite group of builders on the cutting edge of motorcycle engineering. Metal workers, engravers, air brush artists, and 3D fiber-glass molders and carvers weld, bend, cut, grind, paint, and polish bikes into creation before your eyes. Featured bikes include street fighters, art bikes, theme bikes, monster bikes, café racers, cruisers, rat bikes, sport bikes, scooters, bobbers, and yes, even choppers. All this blood, sweat, and passion is framed by fast-paced comic sketches, beautiful models, and burning rubber.
Now that you’ve fully serviced your Harley Sportster, you can take the opportunity to check all of the safety features on the bike. Make sure the lights are working properly, the horn makes noise, turn signals are operational, and all grommets are in place. Then you should check the throttle, add oil and fill the tires to the correct level. Once your finished with the service, get out and ride!
*****The service manual states you should follow your negation cable down from battery and remove nut that secures the connector to ground stud on the crankcase boss behind the starter motor assembly. You will need to do the reverse during installation.Watch Now >>
Bob bleeds for us. Well, he bleeds the front brakes on this custom caliper set up. He notes the two bleeder set up and that we should remove old fluid before replacing with new. Check your manual DOT4 and DOT5 do not mix. They go pro with the use of a Brake Bleeder that pushes…Watch Now >>
Harley tools are not only specialty tools like JIMS and Kent Moore but many that you have in your garage already. Bob LaRosa gives us a great overview on some of the basic tools we need to service our Harley-Davidson from oil-change to custom part install. Bob shows us that tools are only part of…Watch Now >>