Ryan and Colin Pyle bike to Inner Mongolia, bunking down for a night in a yurt village before visiting one of China’s largest wind farms. Heading away from the idyllic grassland and rolling green hills, they strike the world’s largest traffic jam, where some trucks are stuck for 20 days.
When you’re adjusting the primary chain on your Sportster model, it’s always specified to adjust it in the tightest spot of its travel. Whether you use the hot or the cold measurement, Harley specifies that you do it in the tightest area. Bob teaches you a quick and simple method for locating the tightest spot in the path of the chain. He stresses that any time you are servicing inside the primary you should always unhook the negative cable.Watch Now >>
Bob and Mark demonstrate the process for lubricating your Harley’s steering head bearings and adjusting the fall-away. As always, Bob stresses the importance of adequately prepping all bolts, consulting your user manual to be sure everything is done correctly, covering any painted areas on the bike and, if possible, working with two sets of hands.Watch Now >>
In order to service the fuel filter on your Sportster, you’ll need to drain the fuel tank. Bob demonstrates the best way to do this using a MityVac and a gasoline can. Once you follow his instructions and drain the fuel tank filter, cleaning any dirty parts and tightening any loose bolts, you can refill the tank with fuel and your bike should be good to go.Watch Now >>