On their journey down the Indian south west coast, the Pyle brothers visit Mahindra’s mega car factory, and Colin takes the test to become a car factory worker. Ryan recovers from his first fall of the trip, he’s not seriously hurt but his bike is in need of repair.
Bob teaches you how to adjust the clutch and primary chain on your Harley Softail or Dyna model. Be sure to achieve free play on the clutch cable to verify that you have proper adjustment on the clutch cable pack, and check for the proper specs in your service manual for adjusting the primary chain (if your model has the adjustment window). Bob finishes by mentioning that when you are doing this type of repair, only factory service gaskets should be used.Watch Now >>
Bob takes you through the step-by-step process for throttle cable service and adjustment, and air cleaner service or replacement. He discusses the different parts in the throttle system, their specific roles and how to clean and take care of them, then teaches you about the elements of the air cleaner.Watch Now >>
Bob and Mark demonstrate the process for lubricating your Harley’s steering head bearings and adjusting the fall-away. As always, Bob stresses the importance of adequately prepping all bolts, consulting your user manual to be sure everything is done correctly, covering any painted areas on the bike and, if possible, working with two sets of hands.Watch Now >>
Bob demonstrates the proper technique for checking, servicing and replacing Harley brakes on the rear wheel caliper of your Harley Sportster. He shows how to loosen the caliper, remove the brake pads and install a new set. Once they are in place, he pumps the rear brakes to make sure the caliper is making solid contact with the wheel and checks the fluid reservoir. If the fluid level is low, you should either bleed the brakes or replace the fluid. More Maintenance Videos are listed here.Watch Now >>