• Chrome Caliper / Brake Line Measure / Brake Line Install
    5:51

    Chrome Caliper / Brake Line Measure / Brake Line Install

    Bob and Mark show you how to install a chrome caliper and measure and install a 44-inch Goodridge custom front brake line on your Softail model, making sure all parts fit snug together and that you thread each retaining bolt tightly and securely. Be sure to double-check the caliper spacing on your rotor so that it is centered.

    Watch Now >>
  • Installing custom clutch and throttle cable on a Harley
    15:50

    Installing custom clutch and throttle cable on a Harley

    Bob and Mark show you how to replace a damaged clutch cable and install Barnett throttle cables. They stress the importance of using the new components that come with new Barnett clutch cables rather than the original, removed components. Before you re-install the cables, inspect the slinger mechanism and clutch throwout bearing and several other parts of the transmission to see if they need replacing.

    Watch Now >>
  • Performance Carburetor Kit
    15:41

    Performance Carburetor Kit

    Bob and Mark demonstrate the Harley carb, step-by-step process for completely installing a Mikuni HSR42 Carburetor Kit. It comes fully assembled with air cleaner element, breather tubes, breather mechanism and choke cable installed. You’ll have to use your factory hardware to mount factory or custom flanges to this Harley carb kit. The guys show you how to install the manifold adapter and hook up the carburetor to the rubber mounting adapter. They also suggest checking the condition of all lines (vacuum or fuel) and replace any worn-out, old or dry-rotted ones. Join Bob and Mark as they walk you through everything you need to know in this video about installing a performance Harley carb kit.

    Watch Now >>
  • Custom 2 into1 Performance Exhaust Install
    9:59

    Custom 2 into 1 Performance Exhaust Install

    With the new gasket already installed in the front and rear cylinders on your Softail model, Bob and Mark demonstrate the process for installing a 2:1 performance exhaust. They stress the importance of working with care so that you don’t scratch the surface of the pipe.

    Watch Now >>