• 18:37

    Heated Motorcycle Grips Install: Part 2

    Mike already has the right side heater in position. The heated grips wires and power wires have been snaked through the handlebars and bars have been drilled to accommodate the heater switch and switch wires. With the right side heater wires and the power wires (power and ground) all routed and exiting the left side…

    Watch Now >>
  • Arnott Air Suspension Ultimate Ride Series
    3:51

    Arnott Air Suspension Ultimate Ride Series

    We love “new” here at Fix My Hog. Not just shiny and new but better and new! Arnott air suspension asked us to check out their new Ultimate Ride Series suspension kit and we think it’s pretty kick-ass. Here it is all laid out on the table for you to see. About New Suspension: Arnott…

    Watch Now >>
  • 7:12

    Chrome Fork Slider Covers

    We have a beautiful set of Performance Machine lower sliders and fork slider covers that we will be installing on our Street Glide. Before we lay out our new chrome parts, we have some work to do on this motorcycle. Caliper Removal We already have the motorcycle secured to our lift with straps and a…

    Watch Now >>
  • 7:15

    Harley Fork Sliders Removal

    Bob and Mark have begun disassembly of the 2014 FLHX front end. This disassembly is in anticipation of Performance Machine lower fork sliders, bells, and Monotube fork cartridge kit. Another reason you might remove the forks on this model and many others would be to change the fork oil, replace fork seals, or complete other…

    Watch Now >>
  • 1:14

    Chrome Performance Machine Forks

    Performance Machine is an American company that has been supplying us with the highest quality, bolt-on, alternatives for Harley Davidson models for more than four decades. PM’s focus in innovation is unmatched. Along with great parts comes great customer service. It’s nice to know that you can talk to a real person, in America, and…

    Watch Now >>
  • 1:09

    Progressive Monotube Front Suspension

    Thanks to Progressive Suspension, high performance front suspension is now finally available for 2014 and newer Harley Davidson touring models. The Progressive monotube has combined ride smoothing Frequency Sensing Technology (FST) damper with a progressive rate spring to create a state of the art fork cartridge assembly for the late model Harley Davidson Baggers. The…

    Watch Now >>
  • 12:38

    Draining Harley Fork Tubes

    In this video, Bob walks you through the complete disassembly of the Harley fork tubes on a 2014 Street Glide. There are a few specialty tools needed in order to service this fork assembly. You will need a 12mm allen, a 19mm allen, a fork tube holder (Jims Tools is probably your best bet), and…

    Watch Now >>
  • 17:19

    Left Fork Tube Assembly

    With the left and right fork tube assemblies completely disassembled, Bob has thoroughly cleaned anything that will be reused and is ready to begin reassembly. The fork tubes will be reassembled using Performance Machine lower sliders, Progressive Suspension monotube fork cartridge kit, and James Gasket 49mm seal kit. Left and right sides will be assembled…

    Watch Now >>
  • Progressive Suspension Monotube Cartridge Assembly
    8:23

    Progressive Suspension Monotube Cartridge Assembly

    Bob and Mark have performed some of the same procedures as the left side fork on the right side 49mm fork tube. The fork has been completely disassembled and cleaned. The OEM parts that will not be used have been accounted for and set aside. The fork tube has been reinstalled into the Performance Machine…

    Watch Now >>