• Harley Clutch Cable and Handlebar Removal
    11:49

    Handlebar Controls, Master Cylinder and Brake Line Removal

    Moving along with the ape hanger installation Bob and Mark remove the handlebar controls, master cylinder and brake lines. As always, take your time mark out what you removed, even take a picture our two. We will not be reusing the Harley handlebars you will be re-using the Harley controls. Next Video: Clutch Cable and…

    Watch Now >>
  • Handlebar Controls, Master Cylinder and Brake Line Removal
    7:04

    Harley Clutch Cable and Handlebar Removal

    The LA Choppers Ape Hangers will be taller than the stock Harley handlebars so we will need to remove the stock Harley clutch cable to get ready for a new one. Finally the handlebars come off with the handlebar risers and expose the bushings. Learn how to install new Harley handlebar riser bushings in our…

    Watch Now >>
  • Harley Handlebar Riser Bushings Replacement
    6:48

    Harley Handlebar Riser Bushings Replacement

    Are your handlebars loose? In this expert video, we teach you how to replace Harley handlebar riser bushings. With all these removal steps complete, our experts are ready to start prepping the LA Choppers 13in ape hanger 1 1/2 in. Tree Hugger handlebar for installation. Next Video: 13 Ape Hangers Internal Wiring Stock Harness Pin…

    Watch Now >>
  • 13 in Ape Hangers Internal Wiring - Stock Harness Pin Removal
    19:19

    13 in Ape Hangers Internal Wiring – Stock Harness Pin Removal

    Internal wiring for ape hangers can be tricky. Identify your left and right-hand side controls and the wire location in the plugs. Write down the wire color and locations in case you get called away from the project. We can now reach into the center of the connection and unlock it and remove each wire…

    Watch Now >>
  • Harley Handlebar Wire Extension - Soldering Staggered Connections
    31:36

    Harley Handlebar Wire Extension – Soldering Staggered Connections

    Harley Handlebar Wire Extension is needed when adding apes to your motorcycle. Let’s review soldering connections.  Next video: Extending Stock Wiring Harness – Heat Shrink

    Watch Now >>
  • Extending Stock Wiring Harness - Heat Shrink
    18:44

    Extending Stock Wiring Harness – Heat Shrink

    Extending stock wiring harness will include using heat shrink to make the staggered connection secure and strong. The heat shrink also reduces the size of the wiring harness so you can feed it through the handlebars. Next Video: Pulling Wires Through Ape Hangers

    Watch Now >>
  • Tips on Extending Your Handlebar Wires
    7:54

    Tips on Extending Your Handlebar Wires

    Here is an expert video showing tips for extending your handlebar wires. Bob LaRosa reviews the do’s and don’ts for making a solid connection. Always have all the tools and products you need before you start your project.

    Watch Now >>
  • Pulling Wires Through Ape Hangers
    24:32

    Pulling Wires Through Ape Hangers

    Pulling wires through ape hanger handlebars can be frustrating. Bob and Mark give use some tips on how to go about it. From getting the pull string through the bars, attaching a guide string and then pulling the wires into the bars. Next video: Adding pin connectors to the extended wire harness

    Watch Now >>
  • Adding pin connectors to the extended wire harness
    19:45

    Adding Pin Connectors to the Extended Wire Harness

    Adding pin connectors to the extended Harley wiring harness is not that big of a job. It does take patience so take your time and do them one at a time. Next Video: Installing Harley Ape Hangers

    Watch Now >>