• Are You Ready to Ride?
    4:36

    Motorcycle Pre-Ride Checklist

    Here is a motorcycle pre-ride checklist brought to you by Bob LaRosa. He explains how to make sure you are ready for your next ride. A short ride to the local hang out or a trip of a lifetime to a far away rally warrant the same amount of preparation and care. We want to…

    Watch Now >>
  • 5:25

    How To Drain Milwaukee 8 Fluids

    How To Drain Milwaukee 8 Fluids: 4 Easy Steps Mike has the Milwaukee 8 secured to the lift and is ready to begin the service. Step 1: Warm Up It is always a good idea to begin with the motorcycle “warmed up”. This way, the oils will more quickly and thoroughly drain from their corresponding…

    Watch Now >>
  • 24:03

    Harley Davidson Inner Fairing Installation: Part 1

    The Harley Davidson inner fairing has returned from the painters and Mike is ready to reinstall it back onto the motorcycle. Begin by setting up an open, clean work bench or table with a soft towel or blanket where the finished piece can be laid down without the possibility of damage. A lot of the…

    Watch Now >>
  • 58:18

    Harley-Davidson® Oil Cooler Installation

    My wife and I love our new ride! Just have one question; why does it run so darn hot? Over the last 110 years Harley-Davidson motors have been getting bigger and bigger to create more power and with that comes more heat. Extreme engine heat can be generated when our air-cooled Harley ends up in…

    Watch Now >>
  • Harley-Davidson Shocks – Upgrade to Progressive
    5:51

    Harley-Davidson® Shocks – Upgrade to Progressive

    In this video we review the Harley-Davidson Shocks and upgrading to Progressive shocks. Bob LaRosa gives a review of the stock Harley shocks and why we might want to upgrade to an aftermarket product like Progressive Suspensions 440 series. Watch the full installation video HERE. Available at DennisKirk.com Overview of Progressive Suspension 13.5 in. Chrome…

    Watch Now >>
  • UltraCool Oil Coolers
    6:42

    UltraCool Oil Coolers

    Keeping Your Cool with UltraCool Oil Coolers. Bob gives us a great introduction to heat transfer and dissipation. He shows us an oil cooler and tools needed to install one on your motorcycle. We even added an animation that shows how it works internally. Check it out. Now install it with our installation video.

    Watch Now >>
  • Deutsch Connectors
    2:06

    Deutsch Connectors

    The name might be hard to pronounce but Bob shows us how easy it is to work with them. Have the right tools and patience and get to it. Updated video to define Deutsch Connectors a little better. Another great article in the July 2013 issue of American Iron Magazine. Be sure to check your…

    Watch Now >>
  • Harley Davidson Belt Removal on a Touring Model
    51:03

    Harley-Davidson® Belt Removal on a Touring Model

    Part 1 of the Harley Davidson Belt Removal on a Touring Model. This is the longest procedure we have done to date. The belt removal and replacement videos are over 2 hours and 48 minutes. You will need to review some of the maintenance & performance videos and read your factory service manual before getting…

    Watch Now >>
  • Harley Davidson Drive Belt Replacement on a Touring model
    1:51:07

    Harley-Davidson® Drive Belt Replacement on a Touring model

    Part 2 of the Harley Davidson drive belt replacement and removal. This is the longest procedure we have done to date. The belt removal and replacement videos are over 2 hours and 48 minutes. You will need to review some of the maintenance & performance videos and read your factory service manual before getting into…

    Watch Now >>