• Harley Exhaust - Cobra PowerPro HP 2-into-1
    7:18

    Harley Exhaust – Cobra PowerPro HP 2-into-1

    Overview of Cobra Black PowerPro HP 2-into-1 Harley Exhaust • Same as the original PowerPro but with a new cylindrical muffler body along with the megaphone style • Black 3.5 in. muffler body with a delicately machined chromed billet tip adds looks to any bike • Internal cooling technology keeps a perfect non-blueing muffler body…

    Watch Now >>
  • Custom Harley-Davidson Exhaust Installation Part 2
    9:09

    Custom Harley-Davidson® Exhaust Installation Part 2

    Here’s where the number one upgrade performed on almost every Harley-Davidson can go wrong. Even if you bought the exhaust new, make sure you have all the mounting hardware. This Cobra exhaust does not fit with the Harley-Davidson stock exhaust bracket. Our experts show you how to install the Sportster custom exhaust bracket to get…

    Watch Now >>
  • Exhaust & Clutch Cable removal
    30:07

    Exhaust & Clutch Cable Removal

    With a FL model secured to the table lift, Bob and Mark show you how to upgrade and customize the braided idle / throttle cable, clutch cable, dual disk Goodridge braided front brake lines. This is a performance package, and it is very important that you take time and care when installing and cleaning each of these parts.

    Watch Now >>
  • Custom Exhaust Install
    13:19

    Custom Exhaust Install

    Bob and Mark prep the FL for a custom exhaust install. New gaskets, flanges and hardware prepped with Loctite allow them to put the new exhaust in place. They work together to get mounting bolts in place and install flange nuts. They install the exhaust shields and claps make sure not to scar the new chrome. Make sure you wipe the exhaust down. Any fingerprints left over can leave a mark on the pipes when they get hot.

    Watch Now >>
  • Supertrapp Custom Exhaust System Installation
    25:37

    Supertrapp Custom Exhaust System Installation

    Bob and Mark show us an all-in-one kit for performance slip-on exhaust, mapping and air intake. The remove the stock mufflers and install the new slip-on exhaust with a new torca clap. They move up to remove the stock air cleaner and backing plate. They unplug the throttle position sensor and the intake air temperature sensor and install FI control harness. They wire in the FI control harness into the ECM harness. Their next move is to the install the custom air intake, re-install the fuel tank and dash. They calibrate the FI control before the motorcycle is started.

    Watch Now >>
  • Custom Exhaust Installation
    9:36

    Custom Exhaust Installation

    With the new air intake installed and cleaned, Bob starts the custom exhaust install. New gaskets and mounting brackets go on first. Mark brings in a Mean Mothers exhaust with new flanges and clips. Working together they align the pipe and bolt it on. Exhaust and shields in place they clean up any unwanted fingerprints.…

    Watch Now >>
  • Custom Exhaust #2
    15:07

    Custom Exhaust #2

    Bob has a Road King on the rack to show us stock exhaust removal and how to install a performance exhaust for added horsepower. He removes the exhaust flange nuts front and rear. Working top to bottom, off come the stock mounts and retaining bolts. Mark holds the weight of the exhaust as Bob removes floorboard to finish the removal. Bob installs new exhaust gaskets, preps hardware with Loctite where needed and Mark brings in the performance exhaust with new flanges and clips for install.

    Watch Now >>
  • Custom 2 into1 Performance Exhaust Install
    9:59

    Custom 2 into 1 Performance Exhaust Install

    With the new gasket already installed in the front and rear cylinders on your Softail model, Bob and Mark demonstrate the process for installing a 2:1 performance exhaust. They stress the importance of working with care so that you don’t scratch the surface of the pipe.

    Watch Now >>