Comments on: Replace Brake Light Switch

By: Paul

Paul — Mon, 05 Sep 2022 02:22:39 +0000

I didn’t think I’d ever hear from you. I figured it out myself and rebuilt the rear master cylinder. The toughest part was finding a way to compress the outer spring in order to snap in the C-clamp. I used a hole in a street sign post that was big enough for the shaft, but narrow enough to compress the spring then with the spring compressed I was ready with a needle nose to grab and hold it while I snapped in. But it didn’t fix the problem. There is a guy on YouTube with the same symptoms and in his case it was defective ABS model–an $800 part. Well I’m not going to pay $800 for a block of aluminum so I’m looking for instructions on by-passing the ABS. I WILL NEVER BUY A BIKE WITH ABS AGAIN.

By: Earl Moore

Earl Moore — Thu, 26 Nov 2020 04:26:42 +0000

Very informative

By: Customer Service

Customer Service — Mon, 13 Jan 2020 14:43:33 +0000

In reply to Dale.

Dale,

You will need to use your test light or multimeter to correctly diagnose.
The issue can be in the taillight socket.
Start at the taillight socket and make your way forward.

ELECTRICAL
https://www.fixmyhog.com/video/simplifying-electricity-002170/
https://www.fixmyhog.com/product/overview-of-electrical-systems-part-1-download/
https://www.fixmyhog.com/video/welcome-to-fix-my-hog-electrical-002169/
https://www.fixmyhog.com/video/watts-law-002179/

-Mark
Fix My Hog

By: Dale

Dale — Fri, 10 Jan 2020 13:18:28 +0000

My brake light stays on all the time if it’s not the front brake light switch what else could it be