Our experts show you how-to install LED lights for your Harley-Davidson. We remove stock and install LED headlamp, passing lamps and a very cool Halo. This is a great upgrade that you can do on your Harley. Save the cost of having the installation begin done at the shop and use it to buy these LEDs.
Check out the Fix My Hog review on these products.
Related Video:
Passing and Brake Light LED Install
Bob demonstrates the proper technique for checking, servicing and replacing Harley brakes on the rear wheel caliper of your Harley Sportster. He shows how to loosen the caliper, remove the brake pads and install a new set. Once they are in place, he pumps the rear brakes to make sure the caliper is making solid contact with the wheel and checks the fluid reservoir. If the fluid level is low, you should either bleed the brakes or replace the fluid. More Maintenance Videos are listed here.
Watch Now >>
Bob demonstrates how to service the front and rear brake calipers on a Sportster. There are a few changes that Harley has made over the years, so you should be sure to pay attention to the differences; they could affect how you service your bike.
Watch Now >>
Bob and Mark put an older Sportster up on the lift to show you how to service the front and rear brake calipers. They teach you which parts to remove, clean and replace, and discuss the components of the single piston-style caliper assembly and how they work.
Watch Now >>
When you’re adjusting the primary chain on your Sportster model, it’s always specified to adjust it in the tightest spot of its travel. Whether you use the hot or the cold measurement, Harley specifies that you do it in the tightest area. Bob teaches you a quick and simple method for locating the tightest spot in the path of the chain. He stresses that any time you are servicing inside the primary you should always unhook the negative cable.
Watch Now >>