Harley-Davidson Softail rear belt replacement is almost done. Here we install the primary drain plug, outer primary, fill primary fluid, install floor boards, belt guards, exhaust, battery and seat.
Bob demonstrates how to service the front and rear brake calipers on a Sportster. There are a few changes that Harley has made over the years, so you should be sure to pay attention to the differences; they could affect how you service your bike.Watch Now >>
Bob and Mark demonstrate the professional technique for finding the tight spot in a Sportster’s rear wheel belt. You should do this without a rider or passenger and with the bike in neutral. They teach you how to check for belt tension and deflection and how to retorque the axle so you can give your bike a smoother ride.Watch Now >>
Update: July 2013 the City of Hollister marked the comeback of the Hollister Rally. Sounds like it went well and the Hollister City Council has signed a 10-year agreement to host the rally every July. Game on – Ride & Rock On. We have been to almost every Harley-Davidson rally in this great country and…Watch Now >>
Now that you’ve fully serviced your Harley Sportster, you can take the opportunity to check all of the safety features on the bike. Make sure the lights are working properly, the horn makes noise, turn signals are operational, and all grommets are in place. Then you should check the throttle, add oil and fill the tires to the correct level. Once your finished with the service, get out and ride!
*****The service manual states you should follow your negation cable down from battery and remove nut that secures the connector to ground stud on the crankcase boss behind the starter motor assembly. You will need to do the reverse during installation.Watch Now >>