Sort by:

Damaged Throttle Cable

2004 Road King Custom Hog. My carburetor hangs open to about 3000 RPM’s because a cable that has a slider on it (on the very front side) apparently causes the outer jacket jumps out of the c-clamp slot it goes into at about a 45 degree angle and make the inner cable pull the throttle…

Read more »

Harley Cruise Control

Harley cruise control not working. Evo and Twin Cam Via Email Make sure your throttle is correctly adjusted. Inspect your cruise cable. Be sure it is correctly routed & not bound or damaged. Confirm the cable is connected. Confirm that your speedo is functioning correctly. Check your speed sensor. Here is some cruise control diagnostic:…

Read more »

Harley Idle Cable Sensor

Q: Hi guys, video’s have been great! Thanks!! I’m doing a lot of work on my bike. At the moment, I’m putting on 14″ apes. It’s on a 2002 Road King EFI, no cruise. So I got my longer throttle and idle, but I’m now realizing I have a cruise control sensor in my Harley…

Read more »

Harley Throttle Control

2009 Harley Ultra Classic w/25K no past problems in the past, but on 07-12-14. I had a problem with what I found out and is called “Limp Mode”! no throttle response at all other than running at idle. Error codes I found on the bike were; P1511 & P2135. all having to do with the…

Read more »

Throttle Body Assembly

Any ideas on how to fix my throttle by wire issues on a 10 Street Glide? When you turn the key and hit the run position it goes click click click real loud, now the C.E.L is on all the connections at the unit and ECU are good, I disconnected the power commander and the…

Read more »

Factory Grips

Q: On a 2008 SG is there a trick to changing out the factory grips? I have put new grips on used the manual step by step but it keeps stalling and losing power, if I smack the end of the grip it gives me my throttle back. This cannot be that hard to do…

Read more »