Style and Performance Upgrades

Touringview all >>>

  • 012729f_y0d38u_c-front-tire-caliper-fender-removal-premium
    7:12

    We have a beautiful set of Performance Machine lower sliders and fork slider covers that we will be installing on our Street Glide. Before we lay out our new chrome parts, we have some work to do on this motorcycle. Caliper Removal We already have the motorcycle secured to our lift with straps and a… Read more »

    Watch Now >>
  • 012727f_y0d36u_c-outer-primary-cover-grind-premium
    2:11

    Modification Your Harley outer primary cover may have an oil deflector that is cast into the inside, top, front of the outer primary cover. This deflector was designed to aid in the lubrication of the stock Harley Davidson compensator assembly. If you have this deflector, it will need to be removed from the primary cover…. Read more »

    Watch Now >>
  • Baker Compensator
    4:29

    Upgrade Bob is almost ready to begin assembly of the Baker compensator assembly upgrade. First, the engine crank shaft internal threads must be thoroughly cleaned. Baker recommends that the threads are chased with either a 9/16 – 12 bottoming tap, or with a 9/16 – 12 thread chaser. Be very careful not to damage any… Read more »

    Watch Now >>

Softail & Dynaview all >>>

  • 012729f_y0d38u_c-front-tire-caliper-fender-removal-premium
    7:12

    We have a beautiful set of Performance Machine lower sliders and fork slider covers that we will be installing on our Street Glide. Before we lay out our new chrome parts, we have some work to do on this motorcycle. Caliper Removal We already have the motorcycle secured to our lift with straps and a… Read more »

    Watch Now >>
  • 012727f_y0d36u_c-outer-primary-cover-grind-premium
    2:11

    Modification Your Harley outer primary cover may have an oil deflector that is cast into the inside, top, front of the outer primary cover. This deflector was designed to aid in the lubrication of the stock Harley Davidson compensator assembly. If you have this deflector, it will need to be removed from the primary cover…. Read more »

    Watch Now >>
  • Baker Compensator Kit
    6:33

    We move forward with the Baker compensator kit install and before the new compensator bolt is finally torqued, it is important to confirm or adjust for correct primary chain alignment. The primary chain must be traveling in a straight line across the compensating sprocket and the gears of the clutch basket. If it does not… Read more »

    Watch Now >>

Sportsterview all >>>

  • Cobra Freeway Bars
    2:35

    Bob LaRosa gives us a look at the Cobra Freeway Bars or Case Guards as they call them. Most Harley’s do not come with freeway bars and this optional accessory from Cobra gives a great opportunity to customize our rides. Some riders add them to go for the retro look and to add some style… Read more »

    Watch Now >>
  • cobra powrflo air intake
    2:40

    Bob LaRosa gives us a little fresh air with the Cobra PowrFlo air intake review. You are getting more performance and sound out of your exhaust and now you need to feed the motor more air. This video goes over the benefits of adding an aftermarket air intake to your motorcycle and why Cobra’s PowrFlo… Read more »

    Watch Now >>
  • Harley Fuel Injection
    13:43

    Bob LaRosa walks us through the heart of your Harley fuel injection upgrade process. A mini computer that is the fuel management system. We need to have the ECM upgraded for the performance exhaust, muffler, and air intake systems we install. Watch this Harley fuel injection buyers guide video and Bob will review each systems… Read more »

    Watch Now >>