We partnered with GoTraveler.com to bring you some great adventures on two wheels. In this video Dennis Gage, his son Sam, and famous motorcycle photojournalist Neale Bayly ride 1967 Moto Guzzi V7’s over 1,000-mile from Indiana down to St. Augustine, FL for the Riding through History event. FMH Members log in and check it out and make sure to see more at GoTraveler!
Now that you’ve fully serviced your Harley Sportster, you can take the opportunity to check all of the safety features on the bike. Make sure the lights are working properly, the horn makes noise, turn signals are operational, and all grommets are in place. Then you should check the throttle, add oil and fill the tires to the correct level. Once your finished with the service, get out and ride!
*****The service manual states you should follow your negation cable down from battery and remove nut that secures the connector to ground stud on the crankcase boss behind the starter motor assembly. You will need to do the reverse during installation.Watch Now >>
Harley tools are not only specialty tools like JIMS and Kent Moore but many that you have in your garage already. Bob LaRosa gives us a great overview on some of the basic tools we need to service our Harley-Davidson from oil-change to custom part install. Bob shows us that tools are only part of…Watch Now >>
Bob bleeds for us. Well, he bleeds the front brakes on this custom caliper set up. He notes the two bleeder set up and that we should remove old fluid before replacing with new. Check your manual DOT4 and DOT5 do not mix. They go pro with the use of a Brake Bleeder that pushes…Watch Now >>
Bob and Mark show you how to remove and replace the Harley front wheel on your Sportster. They teach you the proper way to take off the brake caliper and wheel axle so you can do whatever you need to do to the front tire. Once the wheel is off you can replace the tire, retrue the spokes or check the rotor.Watch Now >>