This video series shows you how to remove an S&S Carburetor and how to rebuild it. Bob LaRosa, lines up all the new parts from the rebuild kit and compares them to old before he puts it all back together. Take your time and do it right.
Bob bleeds for us. Well, he bleeds the front brakes on this custom caliper set up. He notes the two bleeder set up and that we should remove old fluid before replacing with new. Check your manual DOT4 and DOT5 do not mix. They go pro with the use of a Brake Bleeder that pushes
Bob teaches you how to adjust the clutch and primary chain on your Harley Softail or Dyna model. Be sure to achieve free play on the clutch cable to verify that you have proper adjustment on the clutch cable pack, and check for the proper specs in your service manual for adjusting the primary chain
Bob and Mark demonstrate the best way to remove and replace the rear tire on your Harley Sportster. Then Bob shows you how to service the rear axle and inspect the wheel bearings so you can guarantee a smooth and safe ride. Also, he makes sure to apply anti-seize on the axle. Next Video: Harley
Bob walks us through Harley rear wheel alignment. He’ll just loosen the rear axle nut and with a homemade tool he’ll measure the proper distance and adjust accordingly. Next Video: Rear Shock Adjustment and Drive Belt Service