• Clutch Cable Completion of Installation
    9:07

    Clutch Cable Completion of Installation

    Bob installs the clutch cable into the lever and into the perch. He removes any stickers and refills the transmission with fluid. He installs the dipstick and checks fluid level. He finishes the clutch cable install by adjusting the clutch and making sure all clips are in place.

    Watch Now >>
  • High Performance Clutch Install & Custom Primary Cover
    30:11

    High Performance Clutch Install & Custom Primary Cover

    Bob LaRosa gives us a nice review of the performance clutch set up and the differences over the years. From show and tell to show and install, Bob takes apart the stock clutch springs, plates, fibers, steels and basket. He presses out the old clutch hub and presses the new clutch hub in. We are dealing with springs have safety glasses handy. He walks us through a detailed and complete reinstall on the bench and then into the motorcycles.

    Watch Now >>
  • Installing a custom clutch cable on a Harley
    7:38

    Installing a custom clutch cable on a Harley

    Bob and Mark demonstrate the proper technique for installing a Barnett clutch cable on a Harley Softail model. Bob discusses some of the precautions you should take when putting the cable in and adjusting it, including how to fasten and torque the holding bolts. They then show you how to re-install the slip-on exhaust. This video will help you navigate the tricky intricacies of manipulating the clutch cable on a Harley.

    Watch Now >>
  • High Performance Clutch Install & Custom Primary Cover
    30:11

    High Performance Clutch Install & Custom Primary Cover

    Bob gives us a nice review the performance clutch set up and the differences over the years. From show and tell to show and install, Bob takes apart the stock clutch springs, plates, fibers, steels and basket. He presses out the old clutch hub and presses the new clutch hub in. We are dealing with springs have safety glasses handy. He walks us through a detailed and complete re-install on the bench and then into the motorcycles. Watch how to replace the clutch and re-install the primary cover for a Harley-Davidson Dyna.

    Watch Now >>
  • Installing custom clutch and throttle cable on a Harley
    15:50

    Installing custom clutch and throttle cable on a Harley

    Bob and Mark show you how to replace a damaged clutch cable and install Barnett throttle cables. They stress the importance of using the new components that come with new Barnett clutch cables rather than the original, removed components. Before you re-install the cables, inspect the slinger mechanism and clutch throwout bearing and several other parts of the transmission to see if they need replacing.

    Watch Now >>