Learn How-to remove the Harley-Davidson oil pump, o-rings, g-rotor gear assemblies, washer, and thrust washers. How-To clean the oil pump and re assemble if you plan on reusing it.
Tech review of the Harley Davidson charging system. Here’s an easy way to make sure your battery is charging. Everyone is at your house and ready to ride. You saddle up and CLICK, your Harley-Davidson does not start. Bob and Mark review an easy way to check your battery and make sure it’s staying charged.…Watch Now >>
Harley tools are not only specialty tools like JIMS and Kent Moore but many that you have in your garage already. Bob LaRosa gives us a great overview on some of the basic tools we need to service our Harley-Davidson from oil-change to custom part install. Bob shows us that tools are only part of…Watch Now >>
Bob bleeds for us. Well, he bleeds the front brakes on this custom caliper set up. He notes the two bleeder set up and that we should remove old fluid before replacing with new. Check your manual DOT4 and DOT5 do not mix. They go pro with the use of a Brake Bleeder that pushes…Watch Now >>
When you’re adjusting the primary chain on your Sportster model, it’s always specified to adjust it in the tightest spot of its travel. Whether you use the hot or the cold measurement, Harley specifies that you do it in the tightest area. Bob teaches you a quick and simple method for locating the tightest spot in the path of the chain. He stresses that any time you are servicing inside the primary you should always unhook the negative cable.Watch Now >>