• Removing and Replacing Harley Fork Oil
    19:53

    Removing and Replacing Harley Fork Oil

    Fork fluid can be tricky and slippery. Bob and Mark drain the fluid and remove the fork from the Dyna. Check your service manual. If you do not have to remove the forks, see our other videos on Front Fork Fluid change. Use caution when removing the end cap, there is pressure in there. Note…

    Watch Now >>
  • Harley Davidson Front Forks Service
    6:45

    Harley-Davidson® Front Forks Service

    Bob and Mark demonstrate the process for adjusting, servicing and maintaining the front fork on your Harley Touring model. You’ll want to keep your service manual on hand, as this is a long service, and it can be difficult.

    Watch Now >>
  • Harley Forks Reinstallation After Service
    14:12

    Harley Forks Reinstallation After Service

    Once you’ve changed the oil in your Touring model’s front fork, you’ll need to reinstall the assembly. This is another two-person job because you should take care to get everything lined up and properly installed. Bob and Mark demonstrate the step-by-step process for reinstalling the outer fairing, passing lamps, headlamp, radio and windshield.

    Watch Now >>
  • Front Fork Service 41mm Conventional Front Forks
    7:39

    Front Fork Service 41mm Conventional Front Forks

    Bob and Mark teach you how to quickly and precisely change the oil on a 41-mm conventional style air-suspended FL front fork for a Touring model. This particular bike has an air-suspended system in which you can pump air to the handlebar reservoir and control fork suspension.

    Watch Now >>