• Harley Davidson Rear Fender Removal

    In this video, Bob and Mark walk us through Harley Davidson rear fender removal. Preperation Whenever you are handling painted components, you should be working with a second set of hands. It is important to use painters tape to protect any areas of the fender that may make contact with another surface. Also, never begin…

    Watch Now >>
  • How to Remove a Harley Front Fender | Fix My Hog

    In this video Bob and Mark walk us through Harley front fender removal. This procedure will be similar on most Harley-Davidsons. There are a number of reasons you may need to remove your front fender. The most common reasons would be to replace your fork seals, removing your lower sliders to replace with chrome, or…

    Watch Now >>
  • Harley Front Fender Hardware Removal | Fix My Hog

    If you want to paint your Harley you will need to remove your fenders and remove all of your harley front fender hardware. In this video Bob shows us how to remove the fender spears and badges on the Softail Deluxe front fender. Whether you are having your fender repaired, or having it sent off…

    Watch Now >>
  • 19:51

    Bob and Mark walk us through Twin Cam fuel tank removal in this video. Harley Davidson Fuel tank removal is not only performed when repairing or customizing paint. It is also a critical procedure performed for a multitude of repairs. It needs to be performed carefully. It needs to be accomplished perfectly. There is nothing…

    Watch Now >>
  • Harley Davidson Fuel Gauge Removal | Fix My Hog

    Harley Davidson fuel gauge removal is fairly easy but it needs to be done correctly. Here are a few reasons why you may be interested in learning about Harley Davidson fuel gauge removal: – You are having your tank’s paint repaired – You are having your tank relined – Replacing a defective fuel gauge –…

    Watch Now >>
  • 22:30

    In this video, Bob demonstrates two piece Harley Davidson fuel tank removal. The two piece fuel tanks demonstrated here are typically found on Harley Davidson, Evolution, Softail models. There are Shovelhead models that have the two piece fuel tank configuration, but the tanks mount differently and rubber grommets are not utilized. There is typically a…

    Watch Now >>
  • Harley Tank Emblem

    Removing a Harley tank emblem or badge is not difficult. It does, however, require that you use patience and common sense. There are a few reasons why you may want or need to remove a Harley tank emblem. You may need to restore or repaint your fuel tank. You may be replacing a damaged fuel…

    Watch Now >>
  • 25:48

    In this video we take a look at removing the Harley oil tank from the Twin Cam Softail. There are a number of reasons why you may need to remove your oil tank. You may want to have your tank painted or powder coated. You may have a damaged tank that needs to be replaced.…

    Watch Now >>
  • 22:44

    Let’s look at Twin Cam Softail oil tank installation. It is necessary to replace the steel oil line o-rings and spacers in preparation for reinserting the lines back into the oil tank. Each line end will need two o-rings and a plastic spacer which is installed (and sold) with a plastic installation tool. These o-rings…

    Watch Now >>