A little Loctite super glue might save your relationship, never mind your rubbers. I know you look at your ride every time you stop and sometimes you notice the rubber on the foot pegs rolls up. You paid a lot for those pegs and you want them to stay in place. Don’t even think about blaming your passenger, it’s not worth the fight. Add a little glue and ride on down the road.
You Might Also Enjoy...
-
5:28Draining Sportster Gas Tank & Filter Service
In order to service the fuel filter on your Sportster, you’ll need to drain the fuel tank. Bob demonstrates the best way to do this using a MityVac and a gasoline can. Once you follow his instructions and drain the fuel tank filter, cleaning any dirty parts and tightening any loose bolts, you can refill the tank with fuel and your bike should be good to go.
Watch Now >> -
7:37Sportster Primary Chain Adjustment & Chain Tight Spot
When you’re adjusting the primary chain on your Sportster model, it’s always specified to adjust it in the tightest spot of its travel. Whether you use the hot or the cold measurement, Harley specifies that you do it in the tightest area. Bob teaches you a quick and simple method for locating the tightest spot in the path of the chain. He stresses that any time you are servicing inside the primary you should always unhook the negative cable.
Watch Now >> -
2:29Harley Rear Shocks Adjustment & Drive Belt Service
Sportster Maintenance can also bring comfort. Here’s any easy way to get more hours in the saddle. Our experts also walk through proper belt services and adjustment on Harley rear shocks. If you are experiencing a wobble make sure to check out these top 6 procedures. Next Video: Belt Deflection
Watch Now >> -
8:43Harley Clutch Adjustment on a Softail or Dyna
Bob teaches you how to adjust the clutch and primary chain on your Harley Softail or Dyna model. Be sure to achieve free play on the clutch cable to verify that you have proper adjustment on the clutch cable pack, and check for the proper specs in your service manual for adjusting the primary chain (if your model has the adjustment window). Bob finishes by mentioning that when you are doing this type of repair, only factory service gaskets should be used.
Watch Now >>
