Bob and Mark take a break from normal maintenance to do a quick upgrade while servicing the Dyna. Bob breaks the old hardware and discards. He install the new Harley custom rotor and new hardware. Make sure to inspect tire and spoke while the tire is off.
In order to service the fuel filter on your Sportster, you’ll need to drain the fuel tank. Bob demonstrates the best way to do this using a MityVac and a gasoline can. Once you follow his instructions and drain the fuel tank filter, cleaning any dirty parts and tightening any loose bolts, you can refillWatch Now >>
Bob teaches you how to adjust the clutch and primary chain on your Harley Softail or Dyna model. Be sure to achieve free play on the clutch cable to verify that you have proper adjustment on the clutch cable pack, and check for the proper specs in your service manual for adjusting the primary chainWatch Now >>
Bob and Mark demonstrate the professional technique for finding the tight spot in a Sportster’s rear wheel belt. You should do this without a rider or passenger and with the bike in neutral. They teach you how to check for belt tension and deflection and how to retorque the axle so you can give yourWatch Now >>
Bob demonstrates how to service the front and rear brake calipers on a Sportster. There are a few changes that Harley has made over the years, so you should be sure to pay attention to the differences; they could affect how you service your bike. Next Video: Sportster Brake Pads 1999 & Older Single PistonWatch Now >>