Like those strips you put on your nose to breather better, a new air cleaner can bring some much needed air to your Harley. Bob shows us how to install the gaskets, backing plate, breather bolts, aftermarket air cleaner and the stock air cleaner cover. Take your time, start the bolts by hand and make sure the threads do not cross.
Bob and Mark put an older Sportster up on the lift to show you how to service the front and rear brake calipers. They teach you which parts to remove, clean and replace, and discuss the components of the single piston-style caliper assembly and how they work.Watch Now >>
Now that you’ve fully serviced your Harley Sportster, you can take the opportunity to check all of the safety features on the bike. Make sure the lights are working properly, the horn makes noise, turn signals are operational, and all grommets are in place. Then you should check the throttle, add oil and fill the tires to the correct level. Once your finished with the service, get out and ride!
*****The service manual states you should follow your negation cable down from battery and remove nut that secures the connector to ground stud on the crankcase boss behind the starter motor assembly. You will need to do the reverse during installation.Watch Now >>
Update: July 2013 the City of Hollister marked the comeback of the Hollister Rally. Sounds like it went well and the Hollister City Council has signed a 10-year agreement to host the rally every July. Game on – Ride & Rock On. We have been to almost every Harley-Davidson rally in this great country and…Watch Now >>
When you’re adjusting the primary chain on your Sportster model, it’s always specified to adjust it in the tightest spot of its travel. Whether you use the hot or the cold measurement, Harley specifies that you do it in the tightest area. Bob teaches you a quick and simple method for locating the tightest spot in the path of the chain. He stresses that any time you are servicing inside the primary you should always unhook the negative cable.Watch Now >>