Ape hangers require longer braided brake lines. In this video we prep the lines with teflon paste and get the brake lines in place. We connect the lines to the calipers and bleed the brakes accordingly.
Next Video: Brake Bleeding Tools Make It Easy
You Might Also Enjoy...
-
3:01Harley-Davidson® Charging System
Tech review of the Harley Davidson charging system. Here’s an easy way to make sure your battery is charging. Everyone is at your house and ready to ride. You saddle up and CLICK, your Harley-Davidson does not start. Bob and Mark review an easy way to check your battery and make sure it’s staying charged.…
Watch Now >> -
8:13Harley Fork Oil Service
Bob and Mark demonstrate the best way to empty Harley fork oil from your Sportster’s front fork sliders and replace it with new oil. It can be a two-man job, so try to complete the service with a friend. Newer bikes mostly use 39-millimeter forks, but most bikes are preset with varying levels of spring in the sliders, so consult your manual before you begin this service. Like any other service, you should clean all of the parts that you remove with parts cleaner to ensure that your bike operates smoothly between services.
Watch Now >> -
4:14Harley Sportster Spark Plugs Replacement
Bob teaches you how to service the spark plugs on your Harley’s engine. Although you can clean and service your old spark plugs, Bob recommends just buying new ones because they are fairly inexpensive. You should purchase gapped, Harley-only spark plugs which usually come with a gap of 38-43,000th of an inch. After applying some anti-seize to the threads of the new plugs, you can thread them into the cylinder by hand and tighten them with a torque wrench and you’ll be good to go.
Watch Now >> -
5:11Harley Sportster Battery Removal & Seat Removal
In this quick demonstration of the Harley Sportster battery removal, you’ll learn how to remove your bike’s seat and side cover so you can check on the condition of your battery and its operating components. It is strongly recommended that you remove the negative cable of the battery first and replace it last when servicing your bike. If you remove the positive cable first, you risk causing a dangerous spark if the battery comes in contact with your bike’s frame. Bob has been dealing with these batteries for years and removes the neg from the battery. If this is your first time, we highly suggest removing neg from ground stud on the crankcase boss(see images)with wobble extension.
Watch Now >>
